When something goes wrong with Windows, the computer will automatically restart. This problem is annoying because it shuts down all open apps and Windows and restarts the computer. Data that wasn’t saved is lost.
In the following situations, the computer restarts itself on its own:
1. System files have been changed without permission.
2. The registry needs to be fixed
3. Device drivers that aren’t enabled are installed
4. Driver software that is not allowed is installed
5. DLLs are registered wrongly or are not compatible with each other.
a. Wrong registration of DLLs
b. DLLs that are not suitable are installed
System files are changed without permission.
Several system files are often used to ensure your operating system works well and are saved on the installation drive. Sometimes, third-party theme or Windows modification software changes these files to use certain features. This causes the system to crash, so your computer immediately starts over. You should check and replace these system files by following the steps below.
1. Put in the DVD-ROM for installing the Microsoft Windows operating system.
2. Click Start, then All Programs, then Accessories.
3. Select Run as Administrator by right-clicking Command Prompt.
4. Type SFC/ScanNow into the box.
Press the ENTER key.
6. Do what the steps on your screen say to do. The computer must be turned back on once the corrupted system files have been changed to their original copies.
Fixing the registry is needed.
Because of mistakes in the system, the computer restarts on its own. Almost always, the trouble is caused by the wrong way the registry is set up. When there is a problem with the registry, the records are not changed correctly or contain data that cause errors in the system or program while running.
Installed Device Drivers Are Not Supported
Drivers are one of the things that cause computer trouble the most. Your operating system and its version should be compatible with the device drivers you install. In other words, the device drivers you loaded should have been made for the operating system platform you are using. The computer would immediately restart if they were made for a different operating system version.
Managing with Computers
1. Click Start and then Control Panel.
2. Go to System and Security | Administrative Tools.
3. Click on Computer Management twice.
4. Select Device Manager.
5. Expand all the groups and make sure that none of the device drivers have an exclamation mark (X sign) before or after their names. The exclamation point means that the device driver is either not connected or loaded correctly or incompatible with your system.
6. If you find a device driver with a question mark, right-click it and choose “Uninstall.”
Remove Software Drivers That Aren’t Supported
If the display driver, sound driver, or network driver is unsuitable for your operating system platform, your computer will restart independently. Read the ReadMe files to determine if the driver software you have loaded is compatible.
1. Click Start and then Control Panel.
2. Go to Programs and click on “Uninstall a Program.”
3. Right-click the driver program that isn’t supported and click Uninstall or Remove.
4. Follow the wizard’s steps, and restart the machine when you’re done.
You can get the right driver software from the website of the maker. First, write down the motherboard’s serial number, which you must enter or choose when picking a driver package to download.
DLLs are registered wrongly, or DLLs that aren’t suitable are installed.
The wrong DLLs were registered.
In the Windows Registry, the DLL files are listed. For example, DLLs may not be registered correctly if the power goes out during startup. The computer restarts immediately when a DLL file registration error causes an exception.
It would be best if you used software to clean up the registry to fix the DLL files and the register.
Installing DLLs that don’t work together
If you just installed a program, it could have the DLLs not being a compatible problem. When the DLL files stored on your system are not compatible with the operating system platform you are using, your computer will automatically restart. Consider this: If you put Windows XP software on a Windows 7 computer, it might have loaded DLLs made for the Windows XP operating system and not for Windows 7.
1. Click Start and then Control Panel.
2. Go to Programs and click on “Uninstall a Program.”
3. Choose the most recently installed program that is causing the trouble.
4. Right-click it and click the Remove or Uninstall button.
5. Talk to the wizard, and when you’re done, restart the machine.
You need to know what advice experts have given. Experts say that a secret problem in your system registry is probably the main reason your computer restarts itself. So, you need to fix the register.
Most of us don’t know how the register works or what to do to fix problems in it. Without real-world experience, it’s hard to figure out how to solve these problems. Any change you make to the registry by mistake can hurt the system and your data.
So, I suggest Intel Software Partner, RegInOut Registry Cleaner, and PC Optimizer, which can do this job safely for you.
Click here to get help right away. Are you upset that your computer restarts itself, and do you want to fix this quickly? Just hit THIS LINK.
Read also: https://elearningzonee.com/technology/
