How to Select a Shower Filter or Whole House Filter


What is a whole-house water softener or filter?

Water filters and softeners for the entire house are precisely what their names imply. They are water filters, and softeners plumbed right into the home’s pipes, ensuring that all water entering the building and being utilized is filtered and softened before it is used. This covers all water, including wastewater, shower, washing, and laundry water.

Whole house filters are very similar to shower filters and other point-of-use filters. Still, instead of filtering water at the point of use (such as the sink or shower faucet), the filters are connected to the home’s pipes at the end, where water enters the residence. This works by directing all incoming water to the whole-house filter system, which then filters all water used inside the house. The same types of filter materials found in shower filters are typically included in whole-house filter cartridges, such as carbon-based filters combined with KDF filters. These cartridges must be replaced when they reach the end of their useful lives, just like shower filters, but because so much more water is being used throughout the house, they must be changed more frequently. These cartridges are more expensive since they are more significant than shower filter cartridges. Whole house filters remove the same contaminants as shower or basin filters since they use the same type of filter materials. These toxins include pesticides, heavy metals, and chlorine.

The operating basis of whole-house water softeners, which differs significantly from whole-house filters, is ion exchange. This means that sodium particles are swapped for hard water particles (such as magnesium and calcium) as water flows through the Whole House Water Softener system. Because of this, whole-house water softeners substitute sodium (salt) particles for hard water particles to soften water rather than removing pollutants like chlorine, heavy metals, etc.

When contrasting Whole House systems with Point of Use systems, such as shower filters, there are a lot of benefits and drawbacks.

Owner vs. Tenant

One of the first factors to consider is if the house is rented when deciding between a whole house filter or whole house water softener vs. a shower filter. A plumber’s specialized knowledge and equipment are needed to install an entire house system. It can be pretty challenging for renters to get a landlord’s approval to install a whole-house filter or water softener. Landlords are frequently hesitant to permit such significant changes because the installation necessitates considerable modifications to the plumbing and water flow of the home. Additionally, accountability must be considered if the building goes wrong and the home’s plumbing sustains damage. Since shower filters do not alter the home’s plumbing, they may be installed simply by changing a shower head. Landlord approval is not required before installing a shower filter system.

Setup fees and ongoing expenses

A whole-house filter or whole-house water softener might have high setup costs. The cost of entry-level systems might start at £200. Since installing the system yourself is not an option, the price of installation by a qualified plumber must also be considered. Shower filters have a lower capacity than whole-house filters, so their cartridges are much more expensive due to their higher power. In contrast, installing a shower filter may be done by anybody without needing specific equipment or expertise; thus, hiring a plumber is unnecessary.

Point of Use versus Whole House

Even when one does not need filtered or softened water, whole-house filters and whole-house water softeners will offer filtered or softened water for the entire house. Filtered water is unnecessary for washing dishes, flushing the toilet, watering plants, and cleaning. Having filtered water on hand for these events seems like a waste of the cartridges’ pricey capacity. A point-of-use filter, such as one in a shower, only filters water when needed, ensuring that only the necessary amounts of water are filtered. Since too much sodium in the diet can damage health, experts advise installing a water filter at the point of use where drinking water is collected when installing a whole house water softener. This guarantees that sodium is eliminated from drinking water.

In summary, point-of-use filters, such as shower filters, are a better option for those who want all the advantages of a whole-house system but do not want to pay for professional installation or the higher costs associated with setting up and maintaining a whole-house system. A whole-house filter is preferable for folks who wish to filter water in every area of their home without worrying about updating individual filters.

Searching for the ideal shower filter requires finding high-quality, well-reviewed items. For shower filters in the UK that are of excellent quality and offer a high level of filtering at a reasonable price, I would suggest

Read also: Getting Ready And Setting Up Glossy Acrylic Kitchen…